Cookie Img
 
 
Hotline Numbers:
+91 9289151047, +91 9811437895
 
 
Home » Products » Industrial Project Reports » Project Report on Acrylic Copolymer Emulsion [EIRI-1411]

Project Report on Acrylic Copolymer Emulsion [EIRI-1411]

Project Report on Acrylic Copolymer Emulsion [EIRI-1411]
Project Report on Acrylic Copolymer Emulsion [EIRI-1411]
Send Inquiry
Product Code : Project Report
Brand Name : ITI
Product Description
Project Report on Acrylic Copolymer Emulsion [EIRI-1411]

Acrylic emulsion polymers are used in large volumes as coatings finishes and binders for leather, inks and paper, as exterior and interior coatings in home and industry, and as adhesive, laminates, elastomers, plasticizers and floor polishes. Part success and future potential stems  from their inherent stability, durability pigment binding characteristics and copolymerization versality. From this broad range, the synthesis chemist can tailor polymers composition and structure to meet customer application. Copolymerization is an polymerization reaction in which  two or more different monomers are converted into a homogenous polymeric product. First the composition of the copolymer depends upon the concentration of the monomer at the locus of  reaction. Copolymerization is further complicated by the fact that the monomers polymerize at different rates. Therefore  the composition of copolymer will vary with the degree of conversion. Thus the polymers formed at the start of the copolymerization may contain a higher proportion of the more reactive monomers than those formed at the end of the polymerization. The polymerization rates are also affected by temperature. To prepare copolymers of uniform composition, various procedures may be used. Some times more reactive monomer is added slowly during the polymerization. One of the advantages of emulsion polymerization is that high molecular weight polymers can be obtained by this method. Increasing the molecular weight of the polymer, increases toughness, scrab resistances, solvent resistance, chemical resistance etc.

Cost Estimation

Plant Capacity                            5000 Kgs/Day
Land & Building (1500 sq.mt.)      Rs. 1.53 Cr.
Plant & Machinery                       Rs. 1.94 Cr.         
W.C. for 2 Months                       Rs. 1.49 Cr.           
Total Capital Investment              Rs. 5 Cr.              
Rate of Return                            64%   
Break Even Point                         35%

Note: ITI can modify the Capacity and Project Cost based on your requirement.

Contents of the Project Reports

Introduction
Uses and Applications
Properties
Market Position
Present Manufacturers
Detailed Process of Manufacture
Formulations
B.I.S. Specifications
Process Flow Sheet Diagram, Plant Layout,
Cost Economics with Profitability Analysis
Capacity
Land & Building Requirements with Rates
List & Details of Plant and Machinery with their Costs
Raw Materials Details/List and Costs
Power & Water Requirements
Labour/Staff Requirements
Utilities and Overheads
Total Capital Investment
Turnover
Cost of Production
Break Even Point
Profitability
Land Man Ratio
Suppliers of Plant & Machineries and Raw Materials
Cash Flow Statement
Repayment Schedule
Interest Chart
Depreciation Chart
Projected Balance Sheet for 5 Years etc.

Industrial Technologies, India
X


 
Industrial Technologies, India
4449, Nai Sarak, Main Road, Delhi - 110006, India
Mr. Ankur Gupta (CEO)
industrialtech.india@gmail.com
 
 
 
Account Holder Name: Industrial Technologies, India IFSC/NEFT/RTGS Code : SBIN0001273
Current Account Number: 3312 1123 908 MICR CODE : 110002141
Bank Address: State Bank of India, Hauz Quazi, Delhi 110006, India
 
INDUSTRIAL TECHNOLOGIES, INDIA All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.