Cookie Img
 
 
Hotline Numbers:
+91 9289151047, +91 9811437895
 
 
Home » Products » Project Report on Rubber Industry » Project Report on BABY NIPPLE [EIRI-1415]

Project Report on BABY NIPPLE [EIRI-1415]

Project Report on BABY NIPPLE [EIRI-1415]
Project Report on BABY NIPPLE [EIRI-1415]
Product Code : Project Report
Brand Name : ITI
Product Description
Project Report on BABY NIPPLE [EIRI-1416]

Silicon  rubbers  have been produced commercially  for  above  25 years,  the  first patent being applied for in 1944.  Their  high cost  of  manufacture, the initial difficulty of  achieving  good physical   properties, and the need for, special techniques  were probably    responsible    for  their  technical  and  commercial development being, for the rubber industry on unorthodox   lines. The  producers did  not offer the raw  polymers  to  the   rubber processor   to  compound  himself,  but  rather  formulated,  and supplied  ready - mixed materials requiring only forming, by  one of the usual processes, and vulcanizing. Subsequently, a few gums were  made  available  and over the years, some  of  the  special technology required to be applied to them has disclosed. Silicons rubbers  constitute  are  of the newest classes  of  rubber  like polymers. These exhibit unique physical and  chemical properties.  Chemically  they  are specially prepared   polymers  of  purified dimethyl  siloxane  in which the reaction is controlled  to  give  linear  chains of  several thousand units.  The unique properties of silicone polymers are particially explained by  the fact  that  bond  energy of silicone oxygen linkage is  about  1.5 times   as  strong  as the C - C linkage in  hydrocarbon  polymers.  Although the  polymer is saturated it can be vulvanised by heating with  a source   of  free  radicals  such  as   benzyol   peroxde.    The outstanding  characteristics  of silicon rubbers  is  their  very broad  useful temperature range (from - 100 to + 500oF). In  this range  flexibility resilience, and tensile strength are  retained to an amaging degree.

Cost Estimation
Plant Capacity                              12500 Nos./Day
Land & Building (Area 500 sq.mt.)   Rs. 41 Lacs
Plant & Machinery                         Rs. 24 Lacs         
W.C. for 2 Months                         Rs. 26 Lacs           
Total Capital Investment                Rs. 95 Lacs              
Rate of Return                              52%   
Break Even Point                           47%

Note: ITI can modify the Capacity and Project Cost based on your requirement.

Contents of the Project Reports

Introduction
Uses and Applications
Properties
Market Position
Present Manufacturers
Detailed Process of Manufacture
Formulations
B.I.S. Specifications
Process Flow Sheet Diagram, Plant Layout,
Cost Economics with Profitability Analysis
Capacity
Land & Building Requirements with Rates
List & Details of Plant and Machinery with their Costs
Raw Materials Details/List and Costs
Power & Water Requirements
Labour/Staff Requirements
Utilities and Overheads
Total Capital Investment
Turnover
Cost of Production
Break Even Point
Profitability
Land Man Ratio
Suppliers of Plant & Machineries and Raw Materials
Cash Flow Statement
Repayment Schedule
Interest Chart
Depreciation Chart
Projected Balance Sheet for 5 Years etc.


Industrial Technologies, India

Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.



 
Industrial Technologies, India
4449, Nai Sarak, Main Road, Delhi - 110006, India
Phone : +919206073529
Mr. Ankur Gupta (CEO)
Mobile : +919206073529
indltech@hotmail.com
 
 
 
Account Holder Name: Industrial Technologies, India IFSC/NEFT/RTGS Code : SBIN0001273
Current Account Number: 3312 1123 908 MICR CODE : 110002141
Bank Address: State Bank of India, Hauz Quazi, Delhi 110006, India
 
INDUSTRIAL TECHNOLOGIES, INDIA All Rights Reserved.