Cookie Img
 
 
Hotline Numbers:
+91 9289151047, +91 9811437895
 
 
Home » Products » Industrial Project Reports » Project Report on CELLULAR LIGHTWEIGHT CONCRETE BRICKS (CLC BRICK) [Eiri-1450]

Project Report on CELLULAR LIGHTWEIGHT CONCRETE BRICKS (CLC BRICK) [Eiri-1450]

Project Report on CELLULAR LIGHTWEIGHT CONCRETE BRICKS (CLC BRICK) [Eiri-1450]
Project Report on CELLULAR LIGHTWEIGHT CONCRETE BRICKS (CLC BRICK) [Eiri-1450]
Send Inquiry
Product Code : Project Report
Brand Name : ITI
Product Description
Project Report on CELLULAR LIGHTWEIGHT CONCRETE BRICKS (CLC BRICK) [Eiri-1450]

Bricks remain one of the most important building materials in the country. Brick making is a traditional industry in India, generally confined to rural areas. In recent years, with expanding urbanization and increasing demand for construction materials, brick kilns have to grow to meet the demand. It has directly or indirectly caused a series of environmental and health problems. At a local level (in the vicinity of a brick kiln), environmental pollution from brick-making operations is injurious to human health, animals and plant life. At a global level, environmental pollution from brick-making operations contributes to the phenomena of global warming and climate change. Also, extreme weather may cause degradation of the brick surface due to frost damage. Global warming and Environmental pollution is now a global concern. Cellular Light Weight Technology blocks can be used as an alternative to the red bricks, to reduce Environmental pollution and Global warming. CLC blocks are environment friendly. The energy consumed in the production of CLC blocks is only a fraction compared to the production of red bricks and emits no pollutants and creates no toxic products or by products. It is produced by initially making a slurry of Cement + Fly Ash + Water, which is further mixed with the addition of pre-formed stable foam in an ordinary concrete mixer under ambient conditions. Based on the trial mixes, it is found that compressive strength of CLC blocks is more than the compressive strength of conventional clay bricks. The addition of foam to the concrete mixture creates millions of tiny voids or cells in the material, hence the name Cellular Concrete.  them. They are usually built-in, but may be free-standing or sometimes sunken. Until recently, most bathtubs were roughly rectangular in shape but with the advent of acrylic thermoformed baths, more shapes are becoming available. Bathtubs are commonly white in colour although many other colours can be found. The process for enamelling cast iron bathtubs was invented by the Scottish-born American David Dunbar Buick.

Cost Estimation


Plant Capacity                                              60.00 Cubic.MT./Day
Land & Building (10000 Sq.Mtr)                Rs. 10.11 Cr
Plant & Machinery                                       Rs. 85.28 Lacs.         
W.C. for 2 Months                                        Rs. 65.52 Lacs           
Total Capital Investment                             Rs. 12.20Cr..              
Rate of Return                                              22%   
Break Even Point                                         52%


Note: ITI can modify the Capacity and Project Cost based on your requirement.

Contents of the Project Reports

Introduction
Uses and Applications
Properties
Market Position
Present Manufacturers
Detailed Process of Manufacture
Formulations
B.I.S. Specifications
Process Flow Sheet Diagram, Plant Layout,
Cost Economics with Profitability Analysis
Capacity
Land & Building Requirements with Rates
List & Details of Plant and Machinery with their Costs
Raw Materials Details/List and Costs
Power & Water Requirements
Labour/Staff Requirements
Utilities and Overheads
Total Capital Investment
Turnover
Cost of Production
Break Even Point
Profitability
Land Man Ratio
Suppliers of Plant & Machineries and Raw Materials
Cash Flow Statement
Repayment Schedule
Interest Chart
Depreciation Chart
Projected Balance Sheet for 5 Years etc.

Industrial Technologies, India
X


 
Industrial Technologies, India
4449, Nai Sarak, Main Road, Delhi - 110006, India
Mr. Ankur Gupta (CEO)
industrialtech.india@gmail.com
 
 
 
Account Holder Name: Industrial Technologies, India IFSC/NEFT/RTGS Code : SBIN0001273
Current Account Number: 3312 1123 908 MICR CODE : 110002141
Bank Address: State Bank of India, Hauz Quazi, Delhi 110006, India
 
INDUSTRIAL TECHNOLOGIES, INDIA All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.