Cookie Img
 
 
Hotline Numbers:
+91 9289151047, +91 9811437895
 
 
Home » Products » Chemical Projects » Project Report on Di Calcium Phosphate From Rock Phosphate [Eiri-0992]

Project Report on Di Calcium Phosphate From Rock Phosphate [Eiri-0992]

Project Report on Di Calcium Phosphate From Rock Phosphate [Eiri-0992]
Project Report on Di Calcium Phosphate From Rock Phosphate [Eiri-0992]
Send Inquiry
Product Code : Project Report
Brand Name : ITI
Product Description
Di Calcium Phosphate From Rock Phosphate [Eiri-0992]
Rock phosphate is the source from which dicalcium phosphate can be manufactured. It finds applicability as a fertilizer. The phosphours pentoxide content ranges around 41-42% in the dihydrate form. The trade mark for a dentrifice grade dicalcium phosphate dihydrate is captioned as "Dicalcium phosphate victor". It is CaHPO4.2H2O plus additive. FCC grade, Which is used as polishing agent in dentrifices. In the shallow, medium and deep-black soils having the carbonate content from 3 to 6%, the available phosphorous was highest at 60 days when superphosphate was applied, whereas in the alluvial soil containing 1% carbonate, the highest available phosphorous was observed at 60 days when the fertilizer applied was dicalcium phosphate. Dicalcium  phosphate proved as effective as superphosphate on alluvial, coastal alluvial, red and laterite soils, but was inferior on medium-black and deltaic saline soils. Non granulated dicalcium phosphate appears to be an acceptable phosphate source for rice on soil other than medium black and deltaic saline. for up land cereals the limited avilable data indicate that some water soluble phosphate is necessary along with dicalcium phosphate. For grain legumes, however, diacalcium phosphate does not seem to be a good source on alluvial, medium-black and mixed red and black soils. It may be mentioned that  superphosphate supplied more calcium and additionally sulphur, which could be critical for grain lequmes in some soils. the basic raw material for this product being rock phosphate.
Cost Estimation
  • Plant Capacity  10 Ton/Day
  • Land & Building (Area 2 Acres)  Rs. 5 Cr.
  • Plant & Machinery  Rs. 1.95 Cr.         
  • W.C. for 2 Months  Rs. 1.05 Cr.           
  • Total Capital Investment  Rs. 8.24 Cr.              
  • Rate of Return  22%   
  • Break Even Point 63%

Note: ITI can modify the Capacity and Project Cost based on your requirement.

Contents of the Project Reports

Introduction
Uses and Applications
Properties
Market Position
Present Manufacturers
Detailed Process of Manufacture
Formulations
B.I.S. Specifications
Process Flow Sheet Diagram, Plant Layout,
Cost Economics with Profitability Analysis
Capacity
Land & Building Requirements with Rates
List & Details of Plant and Machinery with their Costs
Raw Materials Details/List and Costs
Power & Water Requirements
Labour/Staff Requirements
Utilities and Overheads
Total Capital Investment
Turnover
Cost of Production
Break Even Point
Profitability
Land Man Ratio
Suppliers of Plant & Machineries and Raw Materials
Cash Flow Statement
Repayment Schedule
Interest Chart
Depreciation Chart
Projected Balance Sheet for 5 Years etc.

Industrial Technologies, India
X


 
Industrial Technologies, India
4449, Nai Sarak, Main Road, Delhi - 110006, India
Mr. Ankur Gupta (CEO)
industrialtech.india@gmail.com
 
 
 
Account Holder Name: Industrial Technologies, India IFSC/NEFT/RTGS Code : SBIN0001273
Current Account Number: 3312 1123 908 MICR CODE : 110002141
Bank Address: State Bank of India, Hauz Quazi, Delhi 110006, India
 
INDUSTRIAL TECHNOLOGIES, INDIA All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.