Cookie Img
 
 
Hotline Numbers:
+91 9289151047, +91 9811437895
 
 
Home » Products » Feasibility Studies, Project Report Services » Project Report on Epoxidized Soyabean Oil Used In PVC Compound [Eiri-1500]

Project Report on Epoxidized Soyabean Oil Used In PVC Compound [Eiri-1500]

Project Report on Epoxidized Soyabean Oil Used In PVC Compound [Eiri-1500]
Project Report on Epoxidized Soyabean Oil Used In PVC Compound [Eiri-1500]
Send Inquiry
Product Code : Project Report
Brand Name : ITI
Product Description
Epoxidized Soyabean Oil (Secondary Plasticizer) Used In PVC Compound [Eiri-1500]

Epoxidized soybean oil, better known by its acronym, ESBO, is a plasticizer used in polyvinyl chloride (PVC) plastics. It serves as a plasticizer and as a scavenger for hydrochloric acid liberated from PVC when the PVC undergoes heat treatment. A few EU surveys have shown fairly high levels of ESBO in foods, in which about 4% were above the current specific migration limit (SML) for ESBO of 60 mg/kg and about 15% of the samples were above 30 mg ESBO/kg food. High migration levels might lead to an intake that exceeds the existing Tolerable Daily Intake of 1mg/kg body weight/day. Epoxidized linolein a major component of ESBO. ESBO is manufactured from soybean oil through the process of epoxidation. The reason why vegetable oils are widely used as plasticizers is because the high numbers of carbon-carbon double bonds present in vegetable oils make them a good target for manipulation into some other useful products like in this case - from soybean oil into epoxidized soybean oil. The epoxide group is more reactive than double bond, thus providing a more energetically favorable site for reaction and making the oil a good hydrochloric acid scavenger and plasticizer. Usually a peroxide or a peracid is used to add an atom of oxygen and convert the -C=C- bond to an epoxide group.

Cost Estimation


Plant Capacity                               3 MT/Day
Land & Building (1500 sq.mt.)      Rs. 2.11 Cr.
Plant & Machinery                        Rs. 41 Lacs        
W.C. for 3 Months                        Rs. 1.70 Cr.          
Total Capital Investment                 Rs. 4.35 Cr.             
Rate of Return                               23%  
Break Even Point                           58%

Note: ITI can modify the Capacity and Project Cost based on your requirement.

Contents of the Project Reports

Introduction
Uses and Applications
Properties
Market Position
Present Manufacturers
Detailed Process of Manufacture
Formulations
B.I.S. Specifications
Process Flow Sheet Diagram, Plant Layout,
Cost Economics with Profitability Analysis
Capacity
Land & Building Requirements with Rates
List & Details of Plant and Machinery with their Costs
Raw Materials Details/List and Costs
Power & Water Requirements
Labour/Staff Requirements
Utilities and Overheads
Total Capital Investment
Turnover
Cost of Production
Break Even Point
Profitability
Land Man Ratio
Suppliers of Plant & Machineries and Raw Materials
Cash Flow Statement
Repayment Schedule
Interest Chart
Depreciation Chart
Projected Balance Sheet for 5 Years etc.

Industrial Technologies, India
X


 
Industrial Technologies, India
4449, Nai Sarak, Main Road, Delhi - 110006, India
Mr. Ankur Gupta (CEO)
industrialtech.india@gmail.com
 
 
 
Account Holder Name: Industrial Technologies, India IFSC/NEFT/RTGS Code : SBIN0001273
Current Account Number: 3312 1123 908 MICR CODE : 110002141
Bank Address: State Bank of India, Hauz Quazi, Delhi 110006, India
 
INDUSTRIAL TECHNOLOGIES, INDIA All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.