Cookie Img
Hotline Numbers:
+91 9289151047, +91 9811437895
Home » Products » Chemical Projects » Project Report on Ferro Silicon (From Mineral Ingredients) [Eiri-1383]

Project Report on Ferro Silicon (From Mineral Ingredients) [Eiri-1383]

Project Report on Ferro Silicon (From Mineral Ingredients) [Eiri-1383]
Project Report on Ferro Silicon (From Mineral Ingredients) [Eiri-1383]
Send Inquiry
Product Code : Project Report
Brand Name : ITI
Product Description
Project Report on Ferro Silicon (From Mineral Ingredients) [Eiri-1383]

Ferro alloys are used in making alloy steels and castings of different special types as addition agents. Ferro alloys are usually made in electric-are furnaces. Alloy steel have often greater limitations on tramp element concentrations than plain carbon steels. Municipal ferrows scraps is largely used as part of the furnace charge to produce ferro alloys. Incinerated scrap is preferred because all of the consuminats are eleminiated though this source leaves a significant proportion of tin & copper impurities, yes due to the fact that ferro alloy is typically only a small addition to the final steel, the dilution of impurities, contained in the ferro alloy, results in acceptable concentrations. In steel making, various elements are added to the molten metal to effect various properties, eg. deoxidasion grain controly improvement of mechanical/thermal/corrosion properties etc. Chemicals added into steels in the bath consists of iron and the elements intended to be incorporated, hence called ferroalloys. These ferro alloys are produced in electric & many other types of furnaces. A number of ferro alloys produced today contain very little of iron. Ferro alloys are, thus, a special class of addition agents. Ferroalloys/ addition agents can be added to the charge in the furnace, the molten bath near finishing period, laddle or in the mould.

Cost Estimation

Plant Capacity                                  200 MT./Day
Land & Building (1,00,000       Rs. 1.99 Cr.
Plant & Machinery                             Rs. 6.62 Cr.         
W.C. for 2 Months                             Rs. 68.71 Cr.           
Total Capital Investment                   Rs. 78.21 Cr.              
Rate of Return                                 71%   
Break Even Point                              70%

Note: ITI can modify the Capacity and Project Cost based on your requirement.

Contents of the Project Reports

Uses and Applications
Market Position
Present Manufacturers
Detailed Process of Manufacture
B.I.S. Specifications
Process Flow Sheet Diagram, Plant Layout,
Cost Economics with Profitability Analysis
Land & Building Requirements with Rates
List & Details of Plant and Machinery with their Costs
Raw Materials Details/List and Costs
Power & Water Requirements
Labour/Staff Requirements
Utilities and Overheads
Total Capital Investment
Cost of Production
Break Even Point
Land Man Ratio
Suppliers of Plant & Machineries and Raw Materials
Cash Flow Statement
Repayment Schedule
Interest Chart
Depreciation Chart
Projected Balance Sheet for 5 Years etc.

Industrial Technologies, India

Industrial Technologies, India
4449, Nai Sarak, Main Road, Delhi - 110006, India
Mr. Ankur Gupta (CEO)
Account Holder Name: Industrial Technologies, India IFSC/NEFT/RTGS Code : SBIN0001273
Current Account Number: 3312 1123 908 MICR CODE : 110002141
Bank Address: State Bank of India, Hauz Quazi, Delhi 110006, India
INDUSTRIAL TECHNOLOGIES, INDIA All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.