Cookie Img
 
 
Hotline Numbers:
+91 9289151047, +91 9811437895
 
 
Home » Products » Feasibility Studies, Project Report Services » Project Report on Hard Anodised Pressure Cookers And Utensils Eiri-1023

Project Report on Hard Anodised Pressure Cookers And Utensils Eiri-1023

Project Report on Hard Anodised Pressure Cookers And Utensils Eiri-1023
Project Report on Hard Anodised Pressure Cookers And Utensils Eiri-1023
Product Code : Project Report
Brand Name : ITI
Product Description
Hard Anodised Pressure Cookers And Utensils [Eiri-1023]
Pressure  Cookers  are conventionally made  of  Aluminium  Alloys sheet or Circles. In Recent years stainless steel has  penetrated into this field. As stainless steel is not thermally so efficient as  Aluminium, the latest trends towards manufacture of  Pressure Cookers  with  Copper clad bottom of pressure cookers.  In  every family  utensils  of  different metals are used  made  of  steel, Brass, Aluminium, Copper etc. More over  utensils of every metals has a definite significance of its own but aluminium utensils are especially used by  lower class people Because It is light, quite reasonable and with high heat bearing capacity. Because of  these physical qualities  and durability,  Aluminium utensils have high demand  and its demand is only increasing with each  passing  day with  the increase  in population, Although the major demand  for aluminium  utensils is in rural area, yet its popularity is  also increasing  in  urban areas. The pressure cookers  are  extensile used  in  house  hold for preparing food.  Pressure  cookers  are extensively  used in house hold for preparing food. Cookers  have preference  over  the conventional cooking utensils  due  to  the retaining the nutritive value and flavour of the cooked food  and less  time  require and thus  effecting considerable  savings  in time and fuel. It is a closed  cooking with external heat source, capable of maintaining working steam pressure of The full  liquid capacity of vessel total internal volume with lid in position  of 10 litres capacity.

Cost Estimation
Land & Building (Area 500 sq.mt.)  Rs. 87 Lacs
Plant & Machinery  Rs. 45 Lacs         
W.C. for 3 Months  Rs. 2 Cr.           
Total Capital Investment  Rs. 3.41 Cr.              
Rate of Return  75%   
Break Even Point 38%

Note: ITI can modify the Capacity and Project Cost based on your requirement.

Contents of the Project Reports

Introduction
Uses and Applications
Properties
Market Position
Present Manufacturers
Detailed Process of Manufacture
Formulations
B.I.S. Specifications
Process Flow Sheet Diagram, Plant Layout,
Cost Economics with Profitability Analysis
Capacity
Land & Building Requirements with Rates
List & Details of Plant and Machinery with their Costs
Raw Materials Details/List and Costs
Power & Water Requirements
Labour/Staff Requirements
Utilities and Overheads
Total Capital Investment
Turnover
Cost of Production
Break Even Point
Profitability
Land Man Ratio
Suppliers of Plant & Machineries and Raw Materials
Cash Flow Statement
Repayment Schedule
Interest Chart
Depreciation Chart
Projected Balance Sheet for 5 Years etc.

Industrial Technologies, India

Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.



 
Industrial Technologies, India
4449, Nai Sarak, Main Road, Delhi - 110006, India
Phone : +919206073529
Mr. Ankur Gupta (CEO)
Mobile : +919206073529
indltech@hotmail.com
 
 
 
Account Holder Name: Industrial Technologies, India IFSC/NEFT/RTGS Code : SBIN0001273
Current Account Number: 3312 1123 908 MICR CODE : 110002141
Bank Address: State Bank of India, Hauz Quazi, Delhi 110006, India
 
INDUSTRIAL TECHNOLOGIES, INDIA All Rights Reserved.