Cookie Img
 
 
Hotline Numbers:
+91 9289151047, +91 9811437895
 
 
Home » Products » Project report on Oil and Fats » Project Report on Lube Oil Blending And Greases Plant

Project Report on Lube Oil Blending And Greases Plant

Project Report on Lube Oil Blending And Greases Plant
Project Report on Lube Oil Blending And Greases Plant
Product Code : Project Report
Brand Name : ITI
Product Description
Lube Oil Blending And Greases Plant

Lube   oils   generally  include all   classes   of   lubricating materials  that are applied as fuels.  Nearly all of the  world's lube oils are made from the move viscous portion of the crude oil which  remain after removal of gas oil and lighter  fractions  by distillation.  Much of the variations in physical characteristics and  performance  qualities  of lubricating  oils  prepared  from different  crude sources can be accounted for by the millions  of variations that can exist in a single large hydrocarbon molecule.  In order to minimize variations and produce products that provide consistent  performance in specific applications, four steps  are followed in the manufacture of finished lubricating oils from the various  available crudes.  Selection and aggregating  of  crudes according   to  the  principal  types of  hydrocarbon present; distillation   of  the  crude  to  separate  it  into   fractions containing   hydrocarbons  in the same sp  range;  processing  to remove undesirable  constituents from the various fractions or to convert  same  of these materials constituents from  the  various fractions or to convert same of these materials to more desirable materials,  and blending to attain the  physical  characteristics that  are  required in the finished  products  and  incorporating chemical  agents to improve performance. Naphthenic  oil is  more preferable  then paraffinic  oil because of its fluidity  at  low temperature,   particularly  in  cold  weather.  Paraffins   have relatively  low viscosity,  density  and high  freezing point  as compared to other types,  they  are  used more commonly.

Cost Estimation

Plant Capacity  Lube Oil Blending 30 Kls/Day
Grease 16 Ton/Day
Land & Building (Area 5 Acres)  Rs. 4.87 Cr.
Plant & Machinery  Rs. 3.44 Cr.         
W.C. for 3 Months  Rs. 54.26 Cr.           
Total Capital Investment  Rs. 62.87 Cr.              
Rate of Return  25%   
Break Even Point  44%

Note: ITI can modify the Capacity and Project Cost based on your requirement.

Contents of the Project Reports

Introduction
Uses and Applications
Properties
Market Position
Present Manufacturers
Detailed Process of Manufacture
Formulations
B.I.S. Specifications
Process Flow Sheet Diagram, Plant Layout,
Cost Economics with Profitability Analysis
Capacity
Land & Building Requirements with Rates
List & Details of Plant and Machinery with their Costs
Raw Materials Details/List and Costs
Power & Water Requirements
Labour/Staff Requirements
Utilities and Overheads
Total Capital Investment
Turnover
Cost of Production
Break Even Point
Profitability
Land Man Ratio
Suppliers of Plant & Machineries and Raw Materials
Cash Flow Statement
Repayment Schedule
Interest Chart
Depreciation Chart
Projected Balance Sheet for 5 Years etc.


Industrial Technologies, India

Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.



 
Industrial Technologies, India
4449, Nai Sarak, Main Road, Delhi - 110006, India
Phone : +919206073529
Mr. Ankur Gupta (CEO)
Mobile : +919206073529
indltech@hotmail.com
 
 
 
Account Holder Name: Industrial Technologies, India IFSC/NEFT/RTGS Code : SBIN0001273
Current Account Number: 3312 1123 908 MICR CODE : 110002141
Bank Address: State Bank of India, Hauz Quazi, Delhi 110006, India
 
INDUSTRIAL TECHNOLOGIES, INDIA All Rights Reserved.