Cookie Img
 
 
Hotline Numbers:
+91 9289151047, +91 9811437895
 
 
Home » Products » Feasibility Studies, Project Report Services » Project Report on M.S. Pipes [Eiri-1431]

Project Report on M.S. Pipes [Eiri-1431]

Project Report on M.S. Pipes [Eiri-1431]
Project Report on M.S. Pipes [Eiri-1431]
Product Code : Project Report
Brand Name : ITI
Product Description
Project Report on M.S. Pipes [Eiri-1431]

Pipes and tubes find use in almost all the industries/services in one way or the other. Automobile vehicles use metallic pipes, including steel pipes, of a large variety. Gas/water/liquids transporting pipes are spread everywhere. Irrigation, petroleum products, sewerage, chemicals transportation pipes and those used in mines, public water supply networks, are well known. Hydraulic piping may be divided into (i) rigid & (ii) flexible classes. Rigid  piping of iron & steel is either seamless or welded type. Pipes have specified end-threading pipe-fittings in the piping  net-work. The following common tube sizes, their bend=radii & other pertinent data, are taken care of by pipe manufacturers. E R W processes uses tremendous amount of localized heating to bring the material to plastic state and above when it is just ready to melt. The ERW process joins two separate parts by passage of heavy current across the joint. Due to great electrical resistance of the circuit, heat generates locally at the joint surfaces which, when brought in contact at approximately the melting temperature, joint together to give a strong  welded  joint. Either   AC   or  DC current can be used but the   use   of   AC-current  is felt convenient.  It is so because the required  high current  can  be supplied at a low voltage  through a suitable transformer, if AC=source is used.  High current & proper  "push-up" forces are the essential requirements in electric  resistance welding.  Power requirement, for welding a  given  cross-section, varies  widely   with  time-interval of  current  application  to produce the weld.

Cost Estimation

Plant Capacity                                   7.80 MT./Day
Land & Building (Area 3000 sq.mt.)  Rs. 1.68 Cr.
Plant & Machinery                             Rs. 89 Lacs         
W.C. for 2 Months                             Rs. 2.15 Cr.           
Total Capital Investment                      Rs. 4.94 Cr.              
Rate of Return                                    21%   
Break Even Point                               64%

Note: ITI can modify the Capacity and Project Cost based on your requirement.

Contents of the Project Reports

Introduction
Uses and Applications
Properties
Market Position
Present Manufacturers
Detailed Process of Manufacture
Formulations
B.I.S. Specifications
Process Flow Sheet Diagram, Plant Layout,
Cost Economics with Profitability Analysis
Capacity
Land & Building Requirements with Rates
List & Details of Plant and Machinery with their Costs
Raw Materials Details/List and Costs
Power & Water Requirements
Labour/Staff Requirements
Utilities and Overheads
Total Capital Investment
Turnover
Cost of Production
Break Even Point
Profitability
Land Man Ratio
Suppliers of Plant & Machineries and Raw Materials
Cash Flow Statement
Repayment Schedule
Interest Chart
Depreciation Chart
Projected Balance Sheet for 5 Years etc.

Industrial Technologies, India

Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.



 
Industrial Technologies, India
4449, Nai Sarak, Main Road, Delhi - 110006, India
Phone : +919206073529
Mr. Ankur Gupta (CEO)
Mobile : +919206073529
indltech@hotmail.com
 
 
 
Account Holder Name: Industrial Technologies, India IFSC/NEFT/RTGS Code : SBIN0001273
Current Account Number: 3312 1123 908 MICR CODE : 110002141
Bank Address: State Bank of India, Hauz Quazi, Delhi 110006, India
 
INDUSTRIAL TECHNOLOGIES, INDIA All Rights Reserved.