Cookie Img
 
 
Hotline Numbers:
+91 9289151047, +91 9811437895
 
 
Home » Products » Industrial Project Reports » Project Report on `O' Ringss

Project Report on `O' Ringss

Project Report on `O' Ringss
Project Report on `O' Ringss
Send Inquiry
Product Code : Project Report
Brand Name : ITI
Product Description
`O' Ringss
`O' rings are essential components in the automotive engine and machinery such as gear boxes, hydraulic and pneumatic cylinder, pumps and compressors etc. It is used for preventing the escape of lubricating oil from rotating shaft and as also to prevent. Dust from entering inside the engine and other working parts when both contacting parts are stationery the seal is named as "static seal" and when in motion dynamic seal are used. `O'  rings are most popular in use. The metal reinforcement  is necessary to provide rigidily when assembling. The springs are used for exesting pressure to ensure good sealing as the rubber gradually wear. The variety of sizes than can be manufactured are innumerable. Elastomers when exposed to heat tend to harden and becomes brittle, the longer the exposure or higher the temperature, the greater the ageing difference,. The seal life is largely dependent on working temperatures of the sealing lip. in the  absence of conditions which could lead to high  wear  ratio. The  effect  of  temperature  on oil  seals  based  on  following elastomers decreases from left to right Natural  Rubber-Neoprene-Nitrite-Acrylate-Viton-Silica. With the rapid changes in pressure i.e.  pressure differentials the seal life is reduced.
Cost Estimation
Plant Capacity  16000000 Nos./Day
Land & Building (Area 500 sq.mt.)  Rs. 12 Lacs
Plant & Machinery  Rs. 3 Lacs         
W.C. for 1 Months  Rs. 11 Lacs           
Total Capital Investment  Rs. 27 Lacs              
Rate of Return  98%   
Break Even Point 28%

Note: ITI can modify the Capacity and Project Cost based on your requirement.

Contents of the Project Reports

Introduction
Uses and Applications
Properties
Market Position
Present Manufacturers
Detailed Process of Manufacture
Formulations
B.I.S. Specifications
Process Flow Sheet Diagram, Plant Layout,
Cost Economics with Profitability Analysis
Capacity
Land & Building Requirements with Rates
List & Details of Plant and Machinery with their Costs
Raw Materials Details/List and Costs
Power & Water Requirements
Labour/Staff Requirements
Utilities and Overheads
Total Capital Investment
Turnover
Cost of Production
Break Even Point
Profitability
Land Man Ratio
Suppliers of Plant & Machineries and Raw Materials
Cash Flow Statement
Repayment Schedule
Interest Chart
Depreciation Chart
Projected Balance Sheet for 5 Years etc.

Industrial Technologies, India
X


 
Industrial Technologies, India
4449, Nai Sarak, Main Road, Delhi - 110006, India
Mr. Ankur Gupta (CEO)
industrialtech.india@gmail.com
 
 
 
Account Holder Name: Industrial Technologies, India IFSC/NEFT/RTGS Code : SBIN0001273
Current Account Number: 3312 1123 908 MICR CODE : 110002141
Bank Address: State Bank of India, Hauz Quazi, Delhi 110006, India
 
INDUSTRIAL TECHNOLOGIES, INDIA All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.