Cookie Img
 
 
Hotline Numbers:
+91 9289151047, +91 9811437895
 
 
Home » Products » Feasibility Studies, Project Report Services » Project Report On Pre Stressed Concrete Pipes

Project Report On Pre Stressed Concrete Pipes

Project Report On Pre Stressed Concrete Pipes
Project Report On Pre Stressed Concrete Pipes
Product Code : Project Report
Brand Name : ITI
Product Description
Project Report On Pre Stressed Concrete Pipes

Prestressed  Concrete Pipe cater to intermediate  pressure  range for which the metallic pipes are expensive while RCC pipes  would not  be  suitable. The strength of a P.S.C pipe  is  achieved  by helically binding high tensile steel wire under tension around  a concrete  core there by putting the core into  compression.  When the  pipe  is  pressurised  the  stresses  induced  relieve   the compressive  stress  but they arae not sufficent to  subject  the core  to  tenslie stresses. The prestressing  wire  is  protected against corrosion by a surround of cementatious cover coat giving at least 25mm of cover P.S.C competes economically with steel for pipe diameters of 600 mm and above. It is a unique combination of durability  of concrete and high strength of steel combined  with economy in raw materials. The P.S.C pipes are ideally suited  for water supply mains where pressures in the range of 6 Kg/cm2 to 20 Kg/cm2  are  encountered.  Consists of  a  concrete  lined  steel cylinder with steel joint rings welded to its ends warpped with a helix of highly stressed wire and coated with dense cement mortar concrete.  Consists of a concrete core  which   is   pre-compress both  in longitudinal and circumferential directions by a  highly  stressed with the wire wrapping is protected by  coat  of  cement mortar or concrete.

Cost Estimation

Plant Capacity  60 Nos./Day
Land & Building (Area 2.5 Acres)  Rs. 3 Cr.
Plant & Machinery  Rs. 1.46 Cr.         
W.C. for 2 Months  Rs. 8.19 Cr.           
Total Capital Investment  Rs. 13 Cr.              
Rate of Return  47%   
Break Even Point  31%

Note: ITI can modify the Capacity and Project Cost based on your requirement.

Contents of the Project Reports

  • Introduction
  • Uses and Applications
  • Properties
  • Market Position
  • Present Manufacturers
  • Detailed Process of Manufacture
  • Formulations
  • B.I.S. Specifications
  • Process Flow Sheet Diagram, Plant Layout,
  • Cost Economics with Profitability Analysis
  • Capacity
  • Land & Building Requirements with Rates
  • List & Details of Plant and Machinery with their Costs
  • Raw Materials Details/List and Costs
  • Power & Water Requirements
  • Labour/Staff Requirements
  • Utilities and Overheads
  • Total Capital Investment
  • Turnover
  • Cost of Production
  • Break Even Point
  • Profitability
  • Land Man Ratio
  • Suppliers of Plant & Machineries and Raw Materials
  • Cash Flow Statement
  • Repayment Schedule
  • Interest Chart
  • Depreciation Chart
  • Projected Balance Sheet for 5 Years etc.


Industrial Technologies, India

Contact Us

( *represents compulsory fields )

Tips on getting accurate quotes. Please include product name, order quantity, usage, special requests if any in your inquiry.



 
Industrial Technologies, India
4449, Nai Sarak, Main Road, Delhi - 110006, India
Phone : +919206073529
Mr. Ankur Gupta (CEO)
Mobile : +919206073529
industrialtech.india@gmail.com
 
 
 
Account Holder Name: Industrial Technologies, India IFSC/NEFT/RTGS Code : SBIN0001273
Current Account Number: 3312 1123 908 MICR CODE : 110002141
Bank Address: State Bank of India, Hauz Quazi, Delhi 110006, India
 
INDUSTRIAL TECHNOLOGIES, INDIA All Rights Reserved.