Cookie Img
 
 
Hotline Numbers:
+91 9289151047, +91 9811437895
 
 
Home » Products » Industrial Project Reports » Project Report on Processing Of Low Grade Tungesten Ore (Eiri-1072)

Project Report on Processing Of Low Grade Tungesten Ore (Eiri-1072)

Project Report on Processing Of Low Grade Tungesten Ore (Eiri-1072)
Project Report on Processing Of Low Grade Tungesten Ore (Eiri-1072)
Send Inquiry
Product Code : Project Report
Brand Name : ITI
Product Description
Processing Of Low Grade Tungesten Ore (Eiri-1072)
The tungsten has a wide range of Industrial uses. The largest use is  as tungsten  carbide in cemented carbides. The available ore of tungsten are of very low grade ranging from 0.04 to 0.2% WO3 as against the commonly exploited ore grades of 0.5%  WO3  world over.  This process is a daunting challenge to the  metallurgists to develop a suitable technology for the exploitation of  Indian ore  which  of strategic importance to the  country.  The   chief sources  of  tungsten  are mineral scheelite  [CaWo4] and wol framite [ (Fe.Mn) WO3] which deposited by hydrothermal  solution. The  tungsten  has a melting point of 3350oC The highest  of  all metals and it is resistant to all acids at ordinary temperatures. It is elastic ductile and has high tensile strength and can be drawn into very thin wires. The domestic requirements of  tungsten  and   its products are met  through  imports.  Most tungsten  ore  contain  less than 1.5% Wo3. For  concentration tungsten  ore, first crushed and milled to liberate the  tungsten mineral   crystals.  Scheelite   ore  can be concentrated by gravimetric methods often combined with froth floatation,  whilst wolfranite  ore  can  be concentrated by  gravity,  sometimes in combination with magnetic separation.
Cost Estimation
Plant Capacity  4 Ton/Day
Land and Building (Area 5000 sq.mt.)  Rs. 6.60 Cr.
Plant & Machinery  Rs. 23 Lacs         
W.C. for 3 Months  Rs. 1.70 Cr.           
Total Capital Investment  Rs. 8.69 Cr.              
Rate of Return  42%   
Break Even Point 43%


Note: ITI can modify the Capacity and Project Cost based on your requirement.

Contents of the Project Reports

Introduction
Uses and Applications
Properties
Market Position
Present Manufacturers
Detailed Process of Manufacture
Formulations
B.I.S. Specifications
Process Flow Sheet Diagram, Plant Layout,
Cost Economics with Profitability Analysis
Capacity
Land & Building Requirements with Rates
List & Details of Plant and Machinery with their Costs
Raw Materials Details/List and Costs
Power & Water Requirements
Labour/Staff Requirements
Utilities and Overheads
Total Capital Investment
Turnover
Cost of Production
Break Even Point
Profitability
Land Man Ratio
Suppliers of Plant & Machineries and Raw Materials
Cash Flow Statement
Repayment Schedule
Interest Chart
Depreciation Chart
Projected Balance Sheet for 5 Years etc.

Industrial Technologies, India
X


 
Industrial Technologies, India
4449, Nai Sarak, Main Road, Delhi - 110006, India
Mr. Ankur Gupta (CEO)
industrialtech.india@gmail.com
 
 
 
Account Holder Name: Industrial Technologies, India IFSC/NEFT/RTGS Code : SBIN0001273
Current Account Number: 3312 1123 908 MICR CODE : 110002141
Bank Address: State Bank of India, Hauz Quazi, Delhi 110006, India
 
INDUSTRIAL TECHNOLOGIES, INDIA All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.