Hotline Numbers:

+91 9289151047, +91 9811437895

Project Report on Hdpe, Pvc & Cpvc Pipes And Fittings [Eiri-1438]

Project Report on Hdpe, Pvc & Cpvc Pipes And Fittings [Eiri-1438]

35000 INR/Piece

Product Details:


Price And Quantity

  • 35000 INR/Piece
  • 1 Piece

Trade Information

  • 1 Piece Per Day
  • 2-3 Days
  • All India

Product Description

Project Report on Hdpe, Pvc & Cpvc Pipes And Fittings [Eiri-1438]

Today, more PVC Pipes are being used than any other pipe product. PVC is a thrmo setting plastic. In other words, it can only be softened and  molded into form once. If it is softened and remolded a second time it will lose some of it's favorable characteristics. Recently, 'Fuseable PVC' has come to market to compete with the fuseable properties of HDPE Pipe. PVC is very corrosion resistant. It is not a conductor and will not have an electrochemical  reaction with acids and bases that it comes in contact with. For this reason, PVC is sometimes used to coat other materials for protection. PVC also has a high chemical resistance. While it will react with some chemicals, there are a large  number of chemicals it will not react with, making it an excellent product for industrial applications. PVC is not without it's faults. Studies have shown that UV radiation from sunlight not only  discolors the pipe, but also reduces it's impact strength. The deeper you delve into pipe sizing and nomenclature, the more confused you get. This is because as new materials have been developed over the years they tried to keep the outside diameter (OD) the same and adjust the inside diameter (ID) to meet the characteristics of the new material. Most PVC Pipe uses the Nominal Pipe Size (NPS) system. The characteristics for  NPS pipe under  14" in diameter have no logical must be looked  up on a chart.14" and larger NPS  pipe has an outside diameter equal to the pipe size. The  'Schedule'  system (Schedule  40, 80, etc.) is an NPS system. The dimensions of  PVC schedule  pipe matches those of steel pipe. The steel pipe  sizes were developed long before PVC was invented thus the PVC pipe was sized to match the steel pipe.

Cost Estimation

Plant Capacity                       3 MT./Day
Land & Building (1 Acre)      Rs. 1.05 Cr.
Plant & Machinery                 Rs. 1.20 Cr.        
W.C. for 1 Months                 Rs. 44 Lacs          
Total Capital Investment         Rs. 2.97 Cr.             
Rate of Return                       31%  
Break Even Point                   55%

Note: ITI can modify the Capacity and Project Cost based on your requirement.

Contents of the Project Reports

Uses and Applications
Market Position
Present Manufacturers
Detailed Process of Manufacture
B.I.S. Specifications
Process Flow Sheet Diagram, Plant Layout,
Cost Economics with Profitability Analysis
Land & Building Requirements with Rates
List & Details of Plant and Machinery with their Costs
Raw Materials Details/List and Costs
Power & Water Requirements
Labour/Staff Requirements
Utilities and Overheads
Total Capital Investment
Cost of Production
Break Even Point
Land Man Ratio
Suppliers of Plant & Machineries and Raw Materials
Cash Flow Statement
Repayment Schedule
Interest Chart
Depreciation Chart
Projected Balance Sheet for 5 Years etc.
Enter Buying Requirement Details
Email Id
Mobile number

Other Products in 'Plastic Industries Project Reports' category

Account Holder Name: Industrial Technologies, India

Current Account Number: 3312 1123 908


MICR CODE : 110002141

Bank Address: State Bank of India, Hauz Quazi, Delhi 110006, India

Back to top