Hotline Numbers:

+91 9289151047, +91 9811437895

Project Report On Hdpe, Pvc & Pipes And Fitting

Project Report On Hdpe, Pvc & Pipes And Fitting

35000 INR/Piece

Product Details:


Price And Quantity

  • 35000 INR/Piece
  • 1 Piece

Trade Information

  • 1 Piece Per Day
  • 2-3 Days
  • All India

Product Description

Project Report On Hdpe, Pvc & Pipes And Fitting
Today, more PVC Pipes are being used than any other pipe product. PVC  is a thermosetting plastic. In other words, it can  only  be softened  and  molded  into  form once. If  it  is  softened  and remolded  a  second  time it will lose  some  of  it's  favorable characteristics.  Recently, 'Fuseable PVC' has come to market  to compete  with the fuseable properties of HDPE Pipe. PVC  is  very corrosion  resistant. It is not a conductor and will not have  an electrochemical  reaction with acids and bases that it  comes  in contact  with.  For this reason, PVC is sometimes  used  to  coat other  materials  for protection. PVC also has  a  high  chemical resistance. While it will react with some chemicals, there are  a large  number of chemicals it will not react with, making  it  an excellent product for industrial applications. PVC is not without it's  faults. Studies have shown that UV radiation from  sunlight not  only  discolors  the  pipe, but  also  reduces  it's  impact strength. The deeper you delve into pipe sizing and nomenclature, the more confused you get. This is because as new materials  have been  developed  over the years they tried to  keep  the  outside diameter  (OD)  the same and adjust the inside diameter  (ID)  to meet the characteristics of the new material. Most PVC Pipe  uses the  Nominal Pipe Size (NPS) system. The characteristics for  NPS pipe  under  14" in diameter have no  logical must  be  looked  up on a chart.14" and larger NPS  pipe  has  an outside  diameter equal to the pipe size. The  'Schedule'  system (Schedule  40, 80, etc.) is an NPS system. The dimensions of  PVC schedule  pipe matches those of steel pipe. The steel pipe  sizes were  developed long before PVC was invented...thus the PVC  pipe was sized to match the steel pipe.

Cost Estimation

Plant Capacity  3 MT./Day
Land & Building (Area 1 Acres)  Rs. 1.05 Cr.
Plant & Machinery  Rs. 1.20 Cr.         
W.C. for 1 Months  Rs. 44 Lacs           
Total Capital Investment  Rs. 2.97 Cr.              
Rate of Return  31%   
Break Even Point 55%

Note: ITI can modify the Capacity and Project Cost based on your requirement.

Contents of the Project Reports

  • Introduction
  • Uses and Applications
  • Properties
  • Market Position
  • Present Manufacturers
  • Detailed Process of Manufacture
  • Formulations
  • B.I.S. Specifications
  • Process Flow Sheet Diagram, Plant Layout,
  • Cost Economics with Profitability Analysis
  • Capacity
  • Land & Building Requirements with Rates
  • List & Details of Plant and Machinery with their Costs
  • Raw Materials Details/List and Costs
  • Power & Water Requirements
  • Labour/Staff Requirements
  • Utilities and Overheads
  • Total Capital Investment
  • Turnover
  • Cost of Production
  • Break Even Point
  • Profitability
  • Land Man Ratio
  • Suppliers of Plant & Machineries and Raw Materials
  • Cash Flow Statement
  • Repayment Schedule
  • Interest Chart
  • Depreciation Chart
  • Projected Balance Sheet for 5 Years etc.

Enter Buying Requirement Details
Email Id
Mobile number

Other Products in 'Feasibility Studies, Project Report Services' category

Account Holder Name: Industrial Technologies, India

Current Account Number: 3312 1123 908


MICR CODE : 110002141

Bank Address: State Bank of India, Hauz Quazi, Delhi 110006, India

Back to top