Hotline Numbers:

+91 9289151047, +91 9811437895

Project Report on PLASTIC GRANULES FROM WASTE [Eiri-1458]

Project Report on PLASTIC GRANULES FROM WASTE [Eiri-1458]

35000 INR/Piece

Product Details:


Project Report on PLASTIC GRANULES FROM WASTE [Eiri-1458] Price And Quantity

  • 35000 INR/Piece
  • 1 Piece

Project Report on PLASTIC GRANULES FROM WASTE [Eiri-1458] Trade Information

  • 1 Piece Per Day
  • 2-3 Days
  • All India

Product Description


A plastic is any one of a large and varied group of materials which consists of an essential ingredient combinations of carbon with oxygen, hydrogen, nitrogen and other organic and inorganic elements. While solid in the finished state, at some stage in its manufacture it has been or can be formed into various shapes by flow-usually through the application singly or together of heat and pressure. Thermoplastics are those which soften under heat and  again harden when cooled and this process can be repeated a number of times without any appreciable was in the physical properties. Plastics today have a prominent place in the spectrum of materials frequently used by materials engineers and designers. They have earned this placed on the basis of performance at a price, plus the apparently unlimited ability of the plastics industry to develop new plastics or new grades of older plastics to meet specific needs of modern industry. With this status and the tremendous growth of new uses has come an important need for meaningful data on fundamental plastics behaviour under realistic stresses and strains, couched in engineering terms, in short, engineering properties as contrasted with data sheet properties. Needed are engineering criteria for rigidity, strength, endurance and temperature range, which are common to nearly all plastic applications, as well as more specialized performance characteristics that are important only in certain types of special product (eg. electrical properties). Among the plastics the various industrial grade plastic waste available, the following are the materials like A.B.S. (Acrylonitrite Butadiene) styrones, polypropylene, HIPS, L.D.P.E., L.I.D.P.E. Polystyrene, Opp. OPS, and Acrylic. In this report we have considered Ten Industrial grade plastic waste material and for that plastic granules will be prepared.

Cost Estimation

Plant Capacity                                                1 MT/Day                  
Land & Building (1000 Sq.Mtr)                      Rs. 78 Lacs
Plant & Machinery                                          Rs. 29 Lacs         
W.C. for 1 Month                                           Rs. 23 Lacs       
Total Capital Investment                                  Rs. 1.33 Cr             
Rate of Return                                                20%  
Break Even Point                                            68%

Note: ITI can modify the Capacity and Project Cost based on your requirement.

Contents of the Project Reports

Uses and Applications
Market Position
Present Manufacturers
Detailed Process of Manufacture
B.I.S. Specifications
Process Flow Sheet Diagram, Plant Layout,
Cost Economics with Profitability Analysis
Land & Building Requirements with Rates
List & Details of Plant and Machinery with their Costs
Raw Materials Details/List and Costs
Power & Water Requirements
Labour/Staff Requirements
Utilities and Overheads
Total Capital Investment
Cost of Production
Break Even Point
Land Man Ratio
Suppliers of Plant & Machineries and Raw Materials
Cash Flow Statement
Repayment Schedule
Interest Chart
Depreciation Chart
Projected Balance Sheet for 5 Years etc.
Enter Buying Requirement Details
Email Id
Mobile number

Other Products in 'Project report on plastic Technology' category

Account Holder Name: Industrial Technologies, India

Current Account Number: 3312 1123 908


MICR CODE : 110002141

Bank Address: State Bank of India, Hauz Quazi, Delhi 110006, India

Back to top