Hotline Numbers:

+91 9289151047, +91 9811437895

Project Report on Thermocole Based Disposable Plates, Cups And Glasses [Eiri-1473]

Project Report on Thermocole Based Disposable Plates, Cups And Glasses [Eiri-1473]

35000 INR/Piece

Product Details:


Price And Quantity

  • 1 Piece
  • 35000 INR/Piece

Trade Information

  • 1 Piece Per Day
  • 2-3 Days
  • All India

Product Description

Project Report on Thermocole Based Disposable Plates, Cups And Glasses [Eiri-1473]

Thermocole Based Disposable Plates, Cups And Glasses [Eiri-1473]

Expanded polystyrene (EPS) is a rigid and tough, closed-cell foam. It is usually white and made of pre-expanded polystyrene beads. EPS is used for disposable trays, plates, bowls and cups; and for carry-out food packaging (including the hinged lid containers popularly known as "clam shells"). Other uses include molded sheets for building insulation and packing material ("peanuts") for cushioning fragile items inside boxes. Sheets are commonly packaged as rigid panels (size 4 by 8 or 2 by 8 feet  in the United States), which are also known as "bead-board". Due to its technical properties such as low weight, rigidity and formability, EPS can be used in a wide range of different applications. Its market value is likely to rise to more than US$15 billion until 2020. Expandable polystyrene is available in a  range of particle sizes from 0.2 to 3.0 mm. and in shapes varying from round beads to ground cheinks of polymer. These particle are prepared either by heating polymer particle in the presence of blowing agent and allowing the blowing agent to penetrate the particle or by polymerizing the styrene monomer in the presence of  blowing so that the blowing agent is entrapped in the polymerized  bead. Typical  blowing  agents used in such processes are the various isomeric pentanis and hexanex, halo carbons or mixture of these materials.

Cost Estimation
  • Plant Capacity  3000 KGS/Day
  • Land & Building (Area 4000  Rs. 4.78 Cr.
  • Plant & Machinery  Rs. 1.85 Cr.         
  • W.C. for 1 Months  Rs. 69 Lacs           
  • Total Capital Investment  Rs. 7.66 Cr.              
  • Rate of Return  32%   
  • Break Even Point 46%
Note: ITI can modify the Capacity and Project Cost based on your requirement.

Contents of the Project Reports
  • Introduction
  • Uses and Applications
  • Properties
  • Market Position
  • Present Manufacturers
  • Detailed Process of Manufacture
  • Formulations
  • B.I.S. Specifications
  • Process Flow Sheet Diagram, Plant Layout,
  • Cost Economics with Profitability Analysis
  • Capacity
  • Land & Building Requirements with Rates
  • List & Details of Plant and Machinery with their Costs
  • Raw Materials Details/List and Costs
  • Power & Water Requirements
  • Labor/Staff Requirements
  • Utilities and Overheads
  • Total Capital Investment
  • Turnover
  • Cost of Production
  • Break Even Point
  • Profitability
  • Land Man Ratio
  • Suppliers of Plant & Machineries and Raw Materials
  • Cash Flow Statement
  • Repayment Schedule
  • Interest Chart
  • Depreciation Chart
  • Projected Balance Sheet for 5 Years etc.
Enter Buying Requirement Details
Email Id
Mobile number

Other Products in 'Feasibility Studies, Project Report Services' category

Account Holder Name: Industrial Technologies, India

Current Account Number: 3312 1123 908


MICR CODE : 110002141

Bank Address: State Bank of India, Hauz Quazi, Delhi 110006, India

Back to top