Cookie Img
 
 
Hotline Numbers:
+91 9289151047, +91 9811437895
 
 
Home » Products » Industrial Project Reports » Project Report on Prestressed Concrete Electric Poles (Eiri-1054)

Project Report on Prestressed Concrete Electric Poles (Eiri-1054)

Project Report on Prestressed Concrete Electric Poles (Eiri-1054)
Project Report on Prestressed Concrete Electric Poles (Eiri-1054)
Send Inquiry
Product Code : Project Report
Brand Name : ITI
Product Description
Prestressed Concrete Electric Poles (Eiri-1054)
P.C.C. Poles are essentially made of concrete which are inevitably less costly and more economically maintainable than the conventional steel poles. They are of two types depending upon  the end use of the pole-Low tensile and High Tensile Line. The latter is primarily used for transmission of electricity. Prestress Cement Concrete Poles are essentially made of concrete. High tensile wire is inserted into the pre-designed moulds and stretched to reach a certain tension. Galvanised wire is fixed inside the mould for earthing following which a right proportion of concrete mix is poured. Then, the concrete is compacted through vibration to produce high strength concrete poles. After 72 hours, the tension is released and demoulding done. The poles are put under water sprinkler system for a period of 28 days. (Concrete cubes are tested to ascertain the strength before they are offered for inspection.)
Cost Estimation
Plant Capacity  200 Nos./Day
Land and Building (Area 20000 sq.mt.)  Rs. 11.66 Cr.
Plant & Machinery  Rs. 2.49 Cr.         
W.C. for 3 Months  Rs. 7.22 Cr.           
Total Capital Investment  Rs. 21.75 Cr.              
Rate of Return  104%   
Break Even Point 21%

Note: ITI can modify the Capacity and Project Cost based on your requirement.

Contents of the Project Reports

Introduction
Uses and Applications
Properties
Market Position
Present Manufacturers
Detailed Process of Manufacture
Formulations
B.I.S. Specifications
Process Flow Sheet Diagram, Plant Layout,
Cost Economics with Profitability Analysis
Capacity
Land & Building Requirements with Rates
List & Details of Plant and Machinery with their Costs
Raw Materials Details/List and Costs
Power & Water Requirements
Labour/Staff Requirements
Utilities and Overheads
Total Capital Investment
Turnover
Cost of Production
Break Even Point
Profitability
Land Man Ratio
Suppliers of Plant & Machineries and Raw Materials
Cash Flow Statement
Repayment Schedule
Interest Chart
Depreciation Chart
Projected Balance Sheet for 5 Years etc.

Industrial Technologies, India
X


 
Industrial Technologies, India
4449, Nai Sarak, Main Road, Delhi - 110006, India
Mr. Ankur Gupta (CEO)
industrialtech.india@gmail.com
 
 
 
Account Holder Name: Industrial Technologies, India IFSC/NEFT/RTGS Code : SBIN0001273
Current Account Number: 3312 1123 908 MICR CODE : 110002141
Bank Address: State Bank of India, Hauz Quazi, Delhi 110006, India
 
INDUSTRIAL TECHNOLOGIES, INDIA All Rights Reserved.(Terms of Use)
Developed and Managed by Infocom Network Ltd.